Description
Thornado 7HP (212cc) OHV Stationary Motor Petrol Engine (19mm Horizontal Key Shaft / Q-Type)
The Thornado 7HP stationary engine is a 4-stroke, single cylinder OHV forced air-cooled petrol engine with a recoil starter that makes it easy to get the equipment running and on task. The horizontal shaft is ball-bearing mounted which make this engine an ideal replacement for most standard engine configurations. This engine features a durable ductile iron crank shaft and?cast iron cylinder making it the perfect engine for variety of applications including water pumps, Go-karts, wood chippers, Pressure Washers, Bench saws & other Agricultural uses. In addition, with a 3.6L fuel tank, this engine is ready for up to 2.6 hours at 3/4 load.
Key Features
- Powered by Thornado 7HP, 4 Stroke OHV Engine
- 19.05mm Horizontal Key Shaft (Q Type)
- Camshaft and crankshaft are made of steel.
- Durable cast iron cylinder withstands wear
- High quality carburettor for easy starting and operation
- Smooth running with minimal vibration
- Low oil sensor shuts down engine when oil reaches a level that is too low for safe operation
- Fuel shut off valve for safe transport
- High power to weight ratio
- 12 Months Australia Warranty
Suitable Applications
- Water pump
- Cement mixers
- Air compressors
- Mowers
- Log spliter
- Go-Kart
- Generator
- Pressure washer
- Chippers / shredders
- Agricultural uses
*T&C’s Apply, see Warranty Policy for full details.
| SPECIFICATIONS |
| Model No |
TH-070QR |
| ?Type |
Single cylinder 4 stroke, air cooled |
| Displacement |
212cc |
| Bore x Stroke |
70 x 55 mm |
| Max Power |
7 HP / 3600 rpm |
| Max Power |
4.4 kW / 3600 rpm |
| Max Torque |
24N.m/2500rpm |
| Shaft Type |
Horizontal Key Shaft (Q Type) |
| Shaft Diameter |
19.05 mm |
| Shaft Length |
58.5 mm |
| Shaft Rotation |
Anti clockwise from output |
| Compression Ratio |
9.0:1 |
| Fuel Type |
Petrol |
| Oil Type |
SAE10w-30 / SAE30 |
| Fuel Tank Capacity |
3.6L |
| Oil Capacity |
0.55L |
| Ignition System |
Transistorised magneto ignition |
| Starting System |
Recoil start |
| Carburettor |
Flat suction valve carburettor |
| brication system |
Forced splash |
| Governor system |
Centrifugal mechanical |
| Spark Plug Compatible |
NGK – BP-6ES; Torch – F6TC |
| Valve Clearance – Intake |
0.15mm |
| Valve Clearance – Exhaust |
0.20mm |
| Fuel consumption |
<= 395 g/kW.h |
| Mounting Pattern |
62mm L x 78mm W (center to center) |
| Product Length |
390 mm |
| Product Width |
320 mm |
| Product Height |
345 mm |
| Product Weight |
16 Kg |
| Certification |
EPA III |
Thornado 7HP (212cc) OHV Stationary Motor Petrol Engine (19mm Horizontal Key Shaft / Q-Type)
The Thornado 7HP stationary engine is a 4-stroke, single cylinder OHV forced air-cooled petrol engine with a recoil starter that makes it easy to get the equipment running and on task. The horizontal shaft is ball-bearing mounted which make this engine an ideal replacement for most standard engine configurations. This engine features a durable ductile iron crank shaft and?cast iron cylinder making it the perfect engine for variety of applications including water pumps, Go-karts, wood chippers, Pressure Washers, Bench saws & other Agricultural uses. In addition, with a 3.6L fuel tank, this engine is ready for up to 2.6 hours at 3/4 load.
Key Features
- Powered by Thornado 7HP, 4 Stroke OHV Engine
- 19.05mm Horizontal Key Shaft (Q Type)
- Camshaft and crankshaft are made of steel.
- Durable cast iron cylinder withstands wear
- High quality carburettor for easy starting and operation
- Smooth running with minimal vibration
- Low oil sensor shuts down engine when oil reaches a level that is too low for safe operation
- Fuel shut off valve for safe transport
- High power to weight ratio
- 12 Months Australia Warranty
Suitable Applications
- Water pump
- Cement mixers
- Air compressors
- Mowers
- Log spliter
- Go-Kart
- Generator
- Pressure washer
- Chippers / shredders
- Agricultural uses
*T&C’s Apply, see Warranty Policy for full details.
| SPECIFICATIONS |
| Model No |
TH-070QR |
| ?Type |
Single cylinder 4 stroke, air cooled |
| Displacement |
212cc |
| Bore x Stroke |
70 x 55 mm |
| Max Power |
7 HP / 3600 rpm |
| Max Power |
4.4 kW / 3600 rpm |
| Max Torque |
24N.m/2500rpm |
| Shaft Type |
Horizontal Key Shaft (Q Type) |
| Shaft Diameter |
19.05 mm |
| Shaft Length |
58.5 mm |
| Shaft Rotation |
Anti clockwise from output |
| Compression Ratio |
9.0:1 |
| Fuel Type |
Petrol |
| Oil Type |
SAE10w-30 / SAE30 |
| Fuel Tank Capacity |
3.6L |
| Oil Capacity |
0.55L |
| Ignition System |
Transistorised magneto ignition |
| Starting System |
Recoil start |
| Carburettor |
Flat suction valve carburettor |
| brication system |
Forced splash |
| Governor system |
Centrifugal mechanical |
| Spark Plug Compatible |
NGK – BP-6ES; Torch – F6TC |
| Valve Clearance – Intake |
0.15mm |
| Valve Clearance – Exhaust |
0.20mm |
| Fuel consumption |
<= 395 g/kW.h |
| Mounting Pattern |
62mm L x 78mm W (center to center) |
| Product Length |
390 mm |
| Product Width |
320 mm |
| Product Height |
345 mm |
| Product Weight |
16 Kg |
| Certification |
EPA III |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.